Recommendations for Tool Holders

• Tool holder for external machining for all common turning centres
• Threading insert RT11.01–22.01 and LT11.01–22.01
• Cross-sections from 16×16 to 32×32 mm

• Tool holder for internal machining for all common turning centres
• Threading insert RT11.01–22.01 and LT11.01–22.01
• Clamping diameter 16.0–50.0 mm

• Parting-off blade for all common turning centres
• Suitable for grooving and parting off
• Prism height 26.0 and 32.0 mm
• Piercing widths 2.5–6.0 mm
• D((max)) 60.0–120.0 mm

• Axial tool holder for all common turning centres
• Suitable for grooving and recess turning
• Cross-sections 20×20 and 25×25 mm
• Neutral and cranked design
• From D((min)) 48.0 mm to D((max)) 400.0 mm
• Grooving widths from 2.0–6.0 mm
• Depth of cut from 7.0–22.0 mm

• Radial tool holder for all common turning centres
• Suitable for parting-off, grooving and groove turning
• Cross-sections from 16×16 to 20×20 mm
• Grooving widths 2.0–6.0 mm
• Depth of cut 4.0–22.0 mm

• Radial tool holder for all common turning centres
• Suitable for parting-off, grooving and groove turning
• Cross-sections from 16×16 to 20×20 mm
• Grooving widths 2.0–6.0 mm
• Depth of cut 4.0–22.0 mm

DG(S)C grooving system (for bigger grooving depths)

• Radial tool holder for all common turning centres
• Suitable for parting-off, grooving and grooving turning
• Direct coolant supply
• Cross-sections from 16×16 to 25×25 mm
• Grooving widths 2.0–6.0 mm

• Targeted coolant supply
• Controlled chip flow
• Excellent surface finish
• Depth of cut up to 30.0 mm

SC grooving system (for sliding head lathes)

• Radial tool holder for all common turning centres
• Suitable for parting-off, grooving and grooving turning
• Cross-sections from 10×10 to 20×20 mm
• Grooving widths 2.0–3.0 mm
• Depth of cut 10.0–22.0 mm